One Control CROCODILE-TAIL-LOOP

One Control CROCODILE-TAIL-LOOP

Specifications
Dimensions: 18.2(L) x4.35 (W) X2.5 (H) inch 
Weight: 1800g 
Power Supply: DC9V 
Current Drain:  450mA 
Input impedance: 500K ohm 
Output impedance: 10K ohm Max. 
Total Loops: 10
Series Loops: 7
Seperate Loops: 3
Midi: 1 Midi In and 1 Midi Out/Thru

 

BJF Buffer Routing
Many people ask why the Crocodile Tail Loop has a buffered and nonbuffered input. The reason is because with some pedals, guitarists prefer to have a buffer later in their signal chain as to not interfere, or they simply would like no buffer at all.

That is why the Crocodile Tail Loop has a buffer input and output. Think of the buffer input and output just as you would any other guitar pedal. For example if You want have the buffer in loop 8 just run from send 8 into the buffer input, then from the buffer output into return 8.

The Crocodile Tail Loop gives an amazing amount of flexibility
​ when it comes to routing. Selectable buffer switching, amp channel switching and effect loop access are just some of the ways that the Crocodile Tail Loop can help you with routing you guitar and pedalboard.
Amp Channel Switching
The Crocodile Tail Loop  has three separate loops that can be used for a variety of purposes. These loops can be used for amp channel switching or connecting effects to go into an amp’s effects loop as well as a variety of other functions to match individual guitar player’s needs.

Loops 8-10 are all labeled with NO and NC. This stands for Normally Open or Normally Closed. Check your amp's manual to see whether the foots switch in normally open or normally closed. If your amp has a quarter inch input for amp channel switching it is quite likely that the Crocodile Tail Loop  will be able to switch your amp's channels.
MIDI Functions
The Crocodile Tail Loop comes equipped with a midi input and output/thru. The Crocodile Tail Loop was built to be incredibly user friendly and we decided that should be a part of the midi function as well. With close to no programming at all, guitarists can switch midi programs with their favorite digital effects.  Please note that the Crocodile Tail Loop can only send PC# (Patch Change) without the CrocEye.

The Crocodile Tail Loop has TX and RX functions. TX stands for transmit midi, and RX stands for receive midi. Guitarists can choose whether or not they want to send or receive midi program changes on internal programs.

The midi output can also be changed to a midi thru. That way, if you'd like to use a more advanced midi controller or software to control your effects, it is completely possible.

For advanced MIDI functions (PC# and CC#), the CrocEye is needed.  With the CrocEye, you'll be able to send tap tempo instruction stoall Strymons by pressing a single footswitch on the Crocodile Tail Loop.  The CrocEye can support up to 16 devices and 16 channels. 
Link and Sync Functions
One option that separates the Crocodile Tail Loop from many other switchers on the market is the Sync and Link functions. Being able to link or remotely control a loop switcher is incredibly important for many professional musicians. Whether or use a rack of effects or you prefer to have your tech controlling you patch changes, the Crocodile Tail Loop is a great solution for guitarists who use pedals. 

The Link function allows players to connect two Crocodile Tail Loops together with a proprietary cable that uses LAN connectors. Please keep in mind; a standard LAN cable will not be able to connect two Crocodile Tail Loops together. The specific One Control cable must be used. A standard LAN cable will not work. Imagine being able to make combination of up to 20 pedals with one switch.

The Sync function is also extremely useful. As previously mentioned, being able to remotely control a loop switcher is extremely important for professional musicians. With the Crocodile Tail Loop, One Control gives you two options to do so. The first is using two Crocodile Tail Loop and controlling one with the other with our proprietary link cable. The second is using the Crocodile Tail Loop's midi input and controlling the Crocodile Tail Loop with your preferred MIDI controller. Since the Crocodile Tail Loop responds to standard program changes, using it with other midi controller's is very simple.
Using the Crocodile Tail Loop in Stereo
While the Crocodile Tail Loop's jacks are mono, it can be used with one stereo effect in combination with 8 mono pedals. Because the Crocodile Tail Loop has two identical outputs from loops 1-7 you 
​can use one of the extra outs to  help with the stereo process. ​Please keep in mind that using a stereo pedal will take two of the separate loops from the Crocodile Tail Loop. 

1.Run a cable from out #8 to stereo effect input
2.Run one left output from effect into return 8
3.Run the right output from effect into return 9
4.Run cable from out 1 into in 8
5.Run cable from out 2 into in 9
6.Run out 8 to left amp
7.Run out 9 to right amp

These processes can also we done with loops 9 and 10 if so desired. Please keep in mind that stereo effects should be the last step in setting up your Crocodile Tail Loop. Of course going mono after
​going stereo would mean you final signal would once again become mono.

 

유투브 리뷰 샘플 - 누르시면 영상으로 갑니다. 

 

부틱나네 첫 루퍼가 생겼습니다. 미디와 10개 루프 그리고 70가지 프리셋을 저장할수 있는 뱅크까지, 이모든게 이 루퍼 하나로 가능합니다. 해외에서 평균점수 4.7/5 받은 고퀄리티 제품으로 페달트레인 프로 사이즈 정도나 페달이 7개가 넘어가는 보드들에게 이 루퍼가 현명한 대안이 될거라 생각합니다.

 

저역시 메인보드는 루퍼를 올려서 편하게 사용중입니다 :) 스트라이몬이나 이븐타이드 같이 미디 지원페달들은 뱅크저장 값마다 다르게 세팅을 불러올 수 있기 때문에 훨씬 쉽게 탭 한번으로 프리셋 조작이 가능합니다. 

    C$829.00Price
     

    ©2017 by 부틱나네. Proudly created with Wix.com